Privacy Policy


  Home Coast 50 Interior Pictures Construction About Us Contact


Coast 50

Developed for long term, short-handed ocean sailing in comfort, the stylish Coast 50 incorporates the latest design concept together with unique and innovative features. Built in aluminium the Coast 50 is strong and totally recyclable, at a cost close to that of a fibreglass catamaran of the same specification.

The Coast 50 has a shallow draught and is designed to take the ground, buy way of swing up keels and rudder blades.  Each keel has replaceable fuses which allow the keel to swing up if it were to strike a submerged object to minimise damage.  This system is vastly superior to sliding "dagger" boards found on some catamarans.

The Coast 50 is designed with comfort in mind with a large open-plan deck saloon with incorporated galley area.  One hull is dedicated to the owner, with a double cabin, bathroom with heads and a utility room.  The other hull has two versatile cabins which can be adapted to have wither double or twin berths depending on the guests or crew aboard.

The dual steering positions have been positioned under the aluminium bimini with good all round visibility. The deck saloon roof and aluminium bimini have been specifically designed to facilitate rain water collection, which can be fed directly into one of the main water tanks. 

Four liferaft lockers have been included, two of which are accessible in the extremely unlikely event of a complete inversion.  This allows the owner to position the liferafts depending on their personal preferences and requirements.  Additional liferaft lockers can double as waste lockers during longer passages.

The Coast 50 has twin forward anchors, one in front of the other.  This allows both anchors to be deployed when necessary.  The anchors can be easily accessed via deck hatches and they have been specifically designed to be used in conjunction with the SWI-TEC anchor buoy and chain claw.

In addition to the rear bathing ladders emergency ladders can be released on the side decks by someone in the water.



  2015 Ventress International

Website Design Julia Buesnel





Length Over All 14.99m
Length Waterline 14.60m
Beam 7.85m
Draft 0.76m/2.66m
Displacement 12.80T   (15T Laden)
Main Sail 79m2
Self-Tacking Jib 41m2
Asymmetric Spinnaker 195m2
Mast above waterline 21.65m
Engine 2 x Beta marine shaft driven,      "keel-cooled".
Construction Material Aluminium